<p>Glazing is a process where you glaze the pot you have made with a clear glass like coating. Glazing can be done with a transparent layer,or you can add metal in various forms,and even add a range of different colours. The glazing you are using to glaze your pots can be matte or glossy,opaque or translucent,textured or smooth. The effects you can achieve through the glazing process are endless,as it all comes down to formula,applying,and the perfect combination. On the bright side,this gives you an opportunity to be creative,and try different methods and materials. Pottery is all about uniqueness,and glazing allows you to complete the process in style.</p>



<h2 class="wp-block-heading">Understanding Glazes</h2>



<p>Glazes are prepared as a mixture of powdered ingredients,which do not dissolve in water,but merely exist. A glaze mixture does not rotten,so to speak,but with time the ingredients start to come out of suspension. The rate of suspension depends on the ingredient,as different ingredients react in a different manner. Which is why we advise you mix each batch well before applying it. The process is easy and can be done using an electric mixer (on low),using a spatula,or simply by shaking the bottle or jar you have stored your glaze in; just make sure that there is no "glaze cake" at the bottom of the bottle or jar once you are done mixing.</p>



<p>A good glazing experience begins with a clean bisque,that is fired properly. The bisque has to be fired to a temperature that allows all the ingredients and water to produce a certain kind of reaction,but not high enough that it is unable to hold itself. The method would vary from clay to clay. However,if your bisque is overly porous,wetting it will help reduce its porosity,and you will be able to apply an even layer of glaze. A glaze is not sticky by nature,but it is brought to a point where it sits like a layer on top of your pots.</p>



<h2 class="wp-block-heading">Things to Remember During the Glazing Process</h2>



<ul>
<li>Clean - lotion or natural oil from your hands will create a resist spot,where the glaze will be uneven or might not stick at all. During the process,your gloves must be on,and perfectly clean. If you feel your bisque has been compromised in any way,you should bisque it again,rather than risking it.</li>



<li>Remove - before you start the glazing process make sure that all the dust has been removed. If you wish to achieve foolproof results,you should use an air compressor,or can work in any area that is well-ventilated.</li>



<li>Silicon - if you see any rough spots remove them using a silicon carbide paper,and use a damp sponge on the area you have sanded before you fire the bisque.</li>



<li>Removal - when removing access of glaze using dental tools to gain perfect results.</li>



<li>Brushing - if you cannot dip or pour your glaze,it's the perfect time to brush it on your pots. Use a small bowl when using a brush,do you use the glaze directly from the bucket.</li>



<li>Drip - in the unfortunate events of a drip flowing to a previous glazed surface,you will require a lot of patience. Simply set the pot aside,and do not wipe it off. Simply let the drip dry,and using dental tools or a metal rib scrape it off. Make sure you use light and gentle touch.</li>



<li>Dipping - pick a generously sized container,one that is a few inches wider than your pot. If you pick a wide and shallow bowl,it will allow you to keep an eye on your glazing,and you won't be flying blind.</li>
</ul>

What is Glaze?

German

English

Elite

Nunito Sans

Nunito

Roboto

Primary Menu

System Defaults

CustomVariables

Primary color

Primary color hover

Heading text color

Body text color

Banner text color

Primary button text color

Primary button text hover color

Secondary button background color

Secondary button background hover color

Secondary button text color

Secondary button text hover color

Navbar item background color

Navbar item text color

Navbar item text hover color

What is Glaze?

What is Glaze?

Related Posts

FAmina Major

Understanding Glaze Components Part 3: Stabilizers

Introduction to Fuel-Burning Kilns Part 3: Kiln Types

Get Well Soon

Who do I look up to and take an example of